V6 Valve Covers

I have 2 sets of this polish Fiero Valve Covers and 3 sets coming from the polishing shop.

Very litle profit on this valve covers. Some will be less due to initial cost. If interested e-mail me

Hi Bill,Will they fit a carb modifide 2.8 s10 motor? and $ per set, Thanks, Scott

Yes they will, as for price e-mail me. The first two sets are gone, I will have three more sets soon.
This ar polish not chrome.

Bill

Will comp cams magnum roller rocker arms fit under them. this would be for the 3.4 crate engine

Paul

Paul,

Hope Bill doesn't mind if I answer:

We have a 3.4L Crate motor in here with a 252 cam and a set of 1.6 ratio rockers from comp. I don't hear any rattle-rattle, so my guess is yes.



Also:

Anyone thinking about a set of valve covers should consider that although the V6 is already a pretty quiet motor being a hydraulic cam, thick alloy covers such as these will actually queit a motor down just a hair more than any tin factory or aftermarket units. One more reason to consider these- and maybe a justification to your wife who ride in the car twice a year!


-BMC.

Should have mentioned- this motor also has Fiero valve covers!

-BMC.

I have apair stripped down to the metal, have the stock 3.4 crate engine cam in the engine, and the rockers are the 1.6, Bill looked nice the way he had the polishing shop do them up. I just have not put both of them in

Paul

There may be an infraction to the forum policy here. I don't see a problem with it myself but I wanted to post this after I was asked to. Skye kind of singled me out on my posts in the MGB Forum, suggesting they were inappropriate. So whats good for the goose is good for the gander? I guess. I personally think the whole thing about fineline posts shouldn't draw attention as long as a dealer wasn't blatantly advertising.

I know a small few of you could care less so don't try to rub it in because I won't respond to your messages anyway. Sure I'm a crotchity old fart who can still take care of himself, so shoot me? It's been tried.....didn't work!

Dann Wade

British Car Conversions