Hello All,
Im looking for a block to oil gauge sender oil line (flexible one). Anyone have one lieing around for a decent price?
Thanks much, John
WTB: Block to Oil Gauge sender oil line...
The MG Experience ~ Buy, Sell & Trade Forum ~ Archives
MG Classifieds, Used Cars (All Models), New and Used Parts, Wanted Ads (WTB), Trades
If you would like to post a reply, please click below to visit the The MG Experience Forums:
Buy, Sell & Trade Forum : WTB: Block to Oil Gauge sender oil line...
http://www.mgexperience.net/phorum/read.php?42,649035,page=1
Join the discussion, post your photos, or ask your own questions. Membership is FREE!
Buy, Sell & Trade Forum : WTB: Block to Oil Gauge sender oil line...
http://www.mgexperience.net/phorum/read.php?42,649035,page=1
Join the discussion, post your photos, or ask your own questions. Membership is FREE!
Oct 07, 2007 18:27:09
Oct 08, 2007 21:22:32
Is this the one that plugs into the block and goes to the sender on (or near) firewall?
I had a big leak with one of these that was only resolved by replacing **both** the fitting on the block and the hose. old hose with old fitting would leak, even different old hose. Apparently the actual connection (to an inner tube) deforms slightly to seal better (there's an F taper on the fitting and an M taper on the tube and it looks like different pairings are slightly different.
bottom line. IOn my opinion you are better off with new hoses (moss 376-180 AND fitting 460-015 w/washer 324-626. total about $30 in the old catalog I have here.)
Oct 09, 2007 14:37:41
magohn Wrote:
Quote: "
Hello All,
Im looking for a block to oil gauge sender oil line (flexible one). Anyone have one lieing around for a decent price?
Thanks much, John
"
Hello All,
Im looking for a block to oil gauge sender oil line (flexible one). Anyone have one lieing around for a decent price?
Thanks much, John
"
I have a used one that you can have...yup FREE... just come down and pick it up... it is a good line that doesn't leak!! I installed a new one when I changed over to the dual gauge set-up
call me and let me know
Michael
253-277-1464 home
or
253-617-5678 cell (at shop)
This is an archived discussion from the The MG Experience Forums
If you would like to post a reply, please click below to visit the The MG Experience Forums:Buy, Sell & Trade Forum : WTB: Block to Oil Gauge sender oil line...
Archive Index | The MG Experience Forums | Return to The MG Experience