MG MGB and MGB GT Tech Talk
So I installed a new turn signal switch, and all's well except that I must have mixed up the wires, because the headlights only turn on when I step on the Brights Foot Switch...i've uninstalled and checked the wires but still can't figure it out. It's a 67 GT and a brand new turn signal and foot switch. THANK YOU!
There's a site called advance auto wiring(i think) they've got all the wiring diagrams , looked pretty cool. Might be of some help.Mike
Second the Advance Auto Wiring site for really great wiring diagrams. And lots of other cool stuff.
You will need a continuity tester to make sure you hooked up the high beam switch correctly. Make sure that the blue headlamp feed wire is connected to the correct terminal that feeds to the high and low beam when the switch is pressed. It sounds like you have the blue wire hooked to one of the other two terminals.
If you got the switch from Moss, give me a call tomorrow (ext 3023) or send me a pm and I can take a picture of the correct terminals to hook to.
kelvin
Thanks for the help guys! I'll give a look tomorrow and get back to you. :)
