dizzyfiyyed

Jeff,

Got the rebuilt Dizzy on time as you said to my Washington Address.

This is what he did for me.

I bought a Petronix on Ebay (the wrong type) I sent him the one I bought for a trade. Jeff rebuilt one of his cores and sent it to me with the correct model Petronix.

Now where do you find service like that???

Thanks Again Jeff

That's why I wear an "Advanced Distributors" badge in my engine bay!

DanN1DLH Wrote:

I was talking to him earlier about mine. Cant wait to get it back from him:D

Mark, if you haven't yet had the pleasure - well, this isn't just hype from Jeff's homies. You'll notice the difference even before you have the timing dialed in. The car will just pull in all gears, throughout the RPM range.

Now here - have some more Kool-Aid. :D

How much money did this cost?

Paul, glad I could be of help! By the way, the kit I traded you for found a new home the following day, so all is well in the world!

Mark, your distributor shipped out yesterday Priority Mail, so you'll have it before the weekend!

Collin, I don't like to talk prices here - its against forum rules. email me or dig around my website and you'll get a good idea. I'm not as cheap as some of the "new" options, but I don't sell new distributors for a reason! A lot of folks here will share their "new distributor" experiences with you, I'm sure!

It was because of the recommendations of the folks on this site that my Dizzy went to Jeff's resort last week for some R&R. Apparently the PO had done a number on mine. Speaking with Jeff the thing was a mess. Wrong screws, mismatched weightds etc, etc. To think, here i thought it wasn't that bad, although i knew something wasn't right after driving another B.

I can't wait to get it in and drive. I think I'm going to have a whole new car...

Jeff even helped me out with advice for my Fiero seats.

Service second to none.

Ken

By the way Ken, its on its way back to you!
Thank you!!!

Just put mine back in this weekend that Jeff did over the winter, haven't had a chance to take it out, but just the sound seems sweet !!

I'll check the timing and carbs this weekend....?? When I dis-connect the vacuum hose prior to timing, do I also plug it?

Also putting my Advanced Distributor decal to show proudly.

Don

Yep, pull the hose off the dsitributor and plug it so you don't have a leak.

By the way, thanks for all the kind words! I hope to meet all of you at the MG2008 this summer? You're ALL coming, right? :)

Jeff should be getting my dizzy today for a R&R. Not sure whats wrong with mine.

Yes, Jeff will take care of you. I sent mine in by accident with a spade connector broken off, he replaced it as a matter of course. Of course, I guess he had to in order to test it. Sorry about that Jeff.
walter