length of screws for shifter ring

two lengths of screws for the shifter ring: short and long. The 73 uses 3 long and 1 short, earlier use 4 short.

Anyone have the lengths of these screws?

http://www.moss-europe.co.uk/Shop/ViewProducts.aspx?PlateIndexID=134

#31 above but I can't tell you as I don't believe mine are o/e (besides I've got a 3synchro ring mated to a 4synchro box). A quick email to Moss tech should elicit the info. I did a site search using the part number but it's unique to the shifter ring

For the 3 long/1short setup, as in the photo.

And while you're at it, I put short ones at 12 and 3 o'clock and long at 6 and 9 o'clock. I had trouble getting the long one to go in at 3 o'clock so figured that was a a short one. But, when I happened to see a bit of a gouge on the gearbox housing at 12 o'clock I guessed maybe a short one should go there as well since it appeared a long one may have made that gouge.

????
David

Ryan, thanks.

And FWIW, fastener length is measured by the length of the threads alone, not the head. So it looks like about 1-1/8 (not 1-1/4) and 3/4. That helps. I'm going to use locally sourced chromed fasteners with my black powder-coated ring.

On my '74 GT the thread lengths are: Long 1 1/8", Short 5/8". I have three long and the one short which is at 12 o'clock.
Paul