MGB: MGC Spin-on oil filter conversion info

Does anyone have the install instructions? Got a kit here in the shop and things are not as self-explanatory as expected. Thanks.

What brand of kit? The one I installed was the Mocal, and I don't recall anything really puzzling about it after doing a trial assembly.

Paul Briggs

Nevermind! Robert Kirk came through with some excellent instructions. Thanks.

Sorry Pete, i thought I sent those last week. FWIW, Mocal is the only maker of this device I am aware.

In the instructions a Fram filter is recommended. Does any one have a Napa gold or K&N part number?

[quote=PaulM]
In the instructions a Fram filter is recommended. Does any one have a Napa gold or K&N part number?[/quote]

I can quote one when I get home on Sunday. I got a NAPA filter.

I use the NAPA Gold 1516. The 1515 will work too but it's wider and was almost touching the Lockheed booster on my car.

Paul Briggs

If you go to the lower left and scroll there are about 60 or so crosses....
http://www.power-21.com/FramPower21i/PartDetail.aspx?b=F&pn=PH966B

Paul,
I use a WIX 51516 or 51034 on my conversion. The K&N HP 2009 will also work.

Dave

Thanks Guys!