Moveing along.....again

Making headway on the 72 project now that I have taken some time to work on it.
All the electrical is checked and everything is working. Wireing is all routed and marked. Switches and gauges are ready. Suspension is done, brakes all around, engine and tranie are together waiting to go in, seats and interior are done and ready to go, dash is ready. Under hood is all done, heater box, peddle box, MC, and clutch MC are in and all lines are run. Filled and checked the clutch MC and it pressured up with no leaks...used a piece of 3/8 gas line with a bolt in the end attached to the clutch flex hose to check it out. Now the bad part, the frigin brake MC is leaking fluid out the front where the plunger goes...glad I am using dot 5 silicone fluid, cause it's all over the place. Anyway the breaks presured up and functioned with now line or cylinder leaks... Don't know what I may have done wrong on the rebuild of the MC but will order a new kit and do it again..Two kits, as I have another MC for it and may as will kit it to. Bound to get a good one out of the two.
Well, that's where I'm at...... should be driving her by late summer.....

Drive her up here Blake!! We would have fun!!!

Ya never know......

We can just hope!!!

Met me in Durango Colorado...We can do the rockies,,,
Going to Calgery Aug 24th to 31st

That is about when we get back from Alaska!! The Springs (Chinook??, Kings??) are running then!! You should be coming here for a fishing adventure!!!!

Free trip......not my pick, but should be fun.......