peddle box

newbie here.first off you people have great advice.does anybody have a closeup of the peddlebox by the inner fender for a 72 midget?mine has a bend down by where the innerfender is spotwelded to the upperfoot well.i know pics would help,trying to download.this is on the engine compartment side.the left frame rail has a small crincle in the same area.i think this should be flat?yes,no. before i start to bang it out.thanks for any input.

Im not quite sure what you are asking for? But here is a picture of the engine bay architecture. If ;you need something more specific, and its not answered, Id be happy to get more detail?
Good luck.

mike thanks.im talking about by the steering colume,on the right on your photo.where tho opening for the peddle box is.ive been following your build,looks great.i just went back out and cut the innerfender off .it was crinkled also.now i have more room to work.floors,inner,outer sills,door skins,inner rear fendars,all need to be replaced.just trying to streighten out the frame first.

Bill, if you are talking about the rails on the pedal box itself, I'm pretty sure those are flat. They should lay flat on the panel that forms the upper/top of the footwell.

Let me know if this is what you are referring to. I have some pictures of mine out of the car.

Put a couple of spaces betwen your sentences when typing, it will be easier for us to get your meaning. :)

mike has a picture some were.he shows where he puts in the box and talks about putting in the break switch,where it almost touches the innerfender.thats the spot.

thanks for your help. i think i found a pic.it shows a small bend where the front of the box mounts.