Unknown wires

The MG Experience ~ MGC Forum ~ Archives

Forum for discussion of the MG factory 6 cylinder, the MGC.

If you would like to post a reply, please click below to visit the The MG Experience Forums:
MGC Forum: Unknown wires
http://www.mgexperience.net/phorum/read.php?48,827304

Join the discussion, post your photos, or ask your own questions. Membership is FREE!




Jun 19, 2008 09:16:22
Swamperca

I ran across a couple of wires coming out of the loom above the radiator reservoir tank. 2 green that splice together and another green with a black stripe. They seem to have gone to something but at the present time they just have spade type connecters and aren’t going to anything I can tell. Do you guys know what they might be for? Also does the reservoir suppose to have some type of insulator material between the metal straps and the brass tank????

Jun 19, 2008 14:37:54
t189dms

Is the windshield washer pump wired? That's in the general area.

Dave





Jun 20, 2008 08:22:29
coloradomgc

Swamper,
Yep, that's definitely the windshield washer pump wiring. I've confirmed the wire colors on my wiring diagram (green - power, light green with black trace - ground). BTW, the second green wire coming off the spade provides power to the carb cooling fan.
Bill

Jun 20, 2008 10:21:26
Swamperca

Sounds right but somebody has put the washer stuff over on the drivers side up by the front of the air cleaner intake. I'm finding these wires on the passenger side by the coolant tank.

Jun 20, 2008 15:33:05
coloradomgc

Hi Swamper,
Sounds like someone has wired the washer pump to the carb cooling fan wiring. Does the washer pump work?
The washer pump is supposed to be on the passenger's side, above the coolant tank.
Bill

Jun 21, 2008 07:12:47
Swamperca

Washer pump was just hanging loose over on the drivers side up by the carb cooling fan on the back side of the bulkhead for the radiator. By the way, are most of you guys keeping the carb cooling fan on the cars and using them. I plan to ceramic coat the exhaust and leaving the stock set up at this point.

Jun 21, 2008 07:27:57
mowog1

Swamperca Wrote:

Quote: "
Washer pump was just hanging loose over on the drivers side up by the carb cooling fan on the back side of the bulkhead for the radiator. By the way, are most of you guys keeping the carb cooling fan on the cars and using them. I plan to ceramic coat the exhaust and leaving the stock set up at this point.
"


I took the cooling fan out and relocated the horns to the side in order to give a little better airflow through the radiator.

This is an archived discussion from the The MG Experience Forums

If you would like to post a reply, please click below to visit the The MG Experience Forums:
MGC Forum: Unknown wires


Archive Index | The MG Experience Forums | Return to The MG Experience