Wiring for emergency flasher switch (and actual flasher unit)

So I was into my center console this weekend messing with a new radio and somehow managed to muck up my flashers (neither turn signals nor emergencies now work).

My shop manual has a nice drawing of what it looks like back there, but doesn't make note of the wire colors.

Does anyone have a nice picture, drawing or explanation of which wires go to what terminals on the switch and flasher so I can rule out an idiot putting things back together? (Which I think is more likely than the flasher unit or switch deciding to take a dive at a time when blame is likely to point to human, rather than mechanical failure).

Connections all seem good but I'm not above wondering if the Prince of Darkness has his hand in this one either.

-Scott

Scott, You may have to use an ohm meter to determine which green wire to hook up because one runs back to the fuse panel the other green to the Turn signal flasher. or turn the ignition switch on and find 12 volts on one of the green that one goes to Number 1.

1 Green
2 Green
3 Green with white
4 no wire
5 Green with Red
6 Light green with brown

Google advanced wire they have excellent coloured diagrams

Here you go Scott.

Scroll down through and you'll find MGC US Market.

That diagram is also available from advanceautowire.com

Did you fix your problem Scott?

Yep.

That wiring diagram is GREAT, Paul. I ended up off on 3 more little projects now that I've got it! {:o)

-Scott

Just think of all the fun you've missed out on over the years by not owning an MGC and not joining in here sooner....;)

Great Scott

x2:thumbsup:

X3...That is very Cool Scott!

You should post some photos...throughout the decades?

X4
I only have 250k on my fishin car, better put her in the wind to catch up. Only had to tow her home once.
Ron