Journal: Clyde Welsh's Journal
|
Visit Clyde Welsh's Profile for more information on this member. Subscribe to this Journal: There are 22 entries in this Journal. Status: Member Location: |
|
DPO FUEL PUMP WIRE
Created on 2006-09-13 07:57:36
I replaced the fuse block on my 71 roadster the other day took care to write down where all the wires were connected, Put in new block hooked wires up went for a drive noticed my front turn singnal light was on steady checked light switch off, turn indicator off Hmm.
Went back home and started checking my rewiring to fuse block found if i disconneted fuse pum wire and moved to different spots on fuse block different things came on and stayed on with ignition off and on.
Finally figured out DPO ran a hot wire from ignation to fuse block to power fuel pump I tried to just use fuel pump wire no power to pump. I wired the hot wire PO installed to pump wire and everything is good now.
I still have to figure out why the pump will not run off fuse block.
Went back home and started checking my rewiring to fuse block found if i disconneted fuse pum wire and moved to different spots on fuse block different things came on and stayed on with ignition off and on.
Finally figured out DPO ran a hot wire from ignation to fuse block to power fuel pump I tried to just use fuel pump wire no power to pump. I wired the hot wire PO installed to pump wire and everything is good now.
I still have to figure out why the pump will not run off fuse block.
Sponsored Links. Did you know you can turn advertising off and support this site by upgrading to a Gold Membership?
Summary of Previous Journal Entries
Showing previous 10 journal entries:
| Title | Date | #Pic | #Cmt | Excerpt |
|---|---|---|---|---|
| New Alloy Head | 2006-08-20 | 2 | Finally got the new alloy head on last weekend. Test drove runs very good, stutters around 3,500 RPM. Re-torqued head bolds and re-adjusted push rod's. Still have to adjust carbs... | |
| 1st Brittish Car Show | 2006-07-25 | 3 | This was the first British car show I've been to either as a participant or an observer, My wife, kid and I had a great time. Spoke with several people there, I received some great... | |
| Ready For Car Show | 2006-07-21 | 3 | Finally got her all ready, wheels polished, Chrome polished, Cleaned, vaccumed & applied Hawaian shine to cockpit & trunk, Washed and applied Cleaner, Polish and Wax, Paint dose no... | |
| Bonnet Compartment Cleaned | 2006-07-17 | 3 | Finished cleaning the engine bay today. I would like to repaint but dont want to remove engine and all the electrical wires. | |
| Upholstery Complete/New Alloy Head | 2006-07-01 | 1 | Finished pass seat today. Received new alloy performance head this week Gives me something to do in a couple of weeks. | |
| New Seat Covers | 2006-06-30 | 1 | Finished drivers seat last weekend, Did a complete disamble sanded, cleaned, & repaint frame. Then replaced bottom straping, foam and covers. | |
| Engine Bay Cleaning | 2006-06-19 | 1 | Got under the bonnet this weekend, remove what I could and cleaned inner metal & sanded, primed and repainted the pieces easily removable. I dont want to take apart too much or rem... | |
| Engine Cleaning | 2006-06-15 | This week I've been removing, repairing and painting various parts under the bonnet. (ie; grill,radiator support and brackets, brake/clutch cover, heater box & canister holder, deg... | ||
| Seat Covers | 2006-06-10 | 1 | Finally got the covers orderd from MOSS rcvd seat foam several weeks ago, Cancelled previous seat cover order waited over 5 weeks still in UK. Have the new ones by the 14th of June... | |
| Seat Covers | 2006-06-10 | Finally got the covers orderd from MOSS rcvd seat foam several weeks ago, Cancelled previous seat cover order waited over 5 weeks still in UK. Have the new ones by the 14th of June... |
The contents of this journal entry (including entry images) are released
under the terms of the Creative Commons License unless otherwise noted.
under the terms of the Creative Commons License unless otherwise noted.
This page last modified December 01 2007 20:50:32 pm



Add a comment to this journal entry:
Please sign in if you already have an account or register now to enable this feature.