Journal: GILBERT DUPRE's Journal
 |
Visit GILBERT (Gil) DUPRE (ret Electrical Engineer)'s Profile for more information on this member. Subscribe to this Journal: 
What is RSS?
There are 80 entries in this Journal. Status: Member Location:  CHATTANOOGA, TN, USA |
|
More Master Cylinder
Created on 2007-12-02 13:09:22
Today I finished cleaning a painting the area under the master cylind box. I took out my trusty airbrush and went to work. Local dupont paint store mixed me some Bracken and it is a very close match. Ill dust it with some grease and nobody will know.
Tapped the lower bolt holes to 3/8 - 24 on both brake and clutch master cylinders.
If I have to change again I wont have to pull box or stand on head to remove.
Tapped the lower bolt holes to 3/8 - 24 on both brake and clutch master cylinders.
If I have to change again I wont have to pull box or stand on head to remove.
Click the thumbnail to view image:
BRAKE BOX AREA 2
BRAKE BOX AREA 2
Sponsored Links. Did you know you can turn advertising off and support this site by upgrading to a Gold Membership?
Summary of Previous Journal Entries
Showing previous 10 journal entries:
| Title | Date | #Pic | #Cmt | Excerpt |
|---|---|---|---|---|
| Clutch Slave Cylinder | 2007-11-30 | Today I removed the clutch slave cylinder and flex line and replaced both with new ones. The flex line was the stainless steel one and I really like the way it is attached to the s... | ||
| MC Bracket & Cover | 2007-11-21 | Today I finished cleaning the MC bracket and cover, degreased and painted. Also cleand and sanded area on shelf where it goes and got a primer coat on it. Will lightly sand and pai... | ||
| Master Cylinder Box Removal | 2007-11-18 | Today I removed the MC and Clutch MC all as one unit box and all. I figured it would be easier this way and I wanted to re furbish the box and supports before I put in new. First I... | ||
| Moss AC Kit Complete | 2007-10-21 | 1 | Finished installing Moss Kit in 74.5 GT. It looks good and seems to cool good up to a point. I dont know what controls the compressor run time but it starts getting cold and then c... | |
| Success Today On AC Installation | 2007-10-17 | Today I took GT to Mobile Air and had the Moss AC Kit I installed in 74.5 RB charged with air. Except for hi lo switch not being tight enough and the compressor belt slipping I now... | ||
| Wasted MG Day | 2007-10-14 | Today I spent digging up my lawn sprinker valve. Late last night I was in the basement looking for something and heard faint sound of water running pipe coming from the street. I h... | ||
| Getting It Ready For Show | 2007-10-13 | Today I put the carbs back on fired it up let it warm up and tuned it according John Twist procedure. Took it for a spin and all seem to be working correctly. Decided to ins... | ||
| AC Intalllation Continuted | 2007-10-12 | I finally got all of the Moss AC kit wiring installed. I put the two relays on the fender just behind the starter relay. I routed the main part of the harness down so the po... | ||
| AC Intalllation Continuted | 2007-10-05 | Got brown wire replace and re taped the harness got a modern day in line fuse holder to replace the roasted one. Put AC control switch in the empty hole on the console. | ||
| Lucas Smoke | 2007-10-05 | Found brown 12 ga wire at NAPA yesterday. Today I put it in the flasher circuit that roasted two days ago. Still scratching head why 35 td fuse blew. Cant find a short anyw... |
The contents of this journal entry (including entry images) are released
under the terms of the Creative Commons License unless otherwise noted.
under the terms of the Creative Commons License unless otherwise noted.
This page last modified December 01 2007 20:50:32 pm
Add a comment to this journal entry:
Please sign in if you already have an account or register now to enable this feature.