Journal: Mark's Mgbgt Adventure
 |
Visit Mark Jones's Profile for more information on this member. Subscribe to this Journal: 
What is RSS?
There are 21 entries in this Journal. Status: Silver Member  Location:  Sarnia, ON, Canada |
|
Welding Complete!
Created on 2008-04-21 08:54:21
The weekend saw the A-post closing pieces, sill end cap and a front corner of the driver side floor pan welded in. That brings the welding to an end. I also dug out the grinder and flapper disk and smoothed out all the welds. It took three months to do all the body repairs. Now it’s time to purchase body filler.
Sponsored Links. Did you know you can turn advertising off and support this site by upgrading to a Gold Membership?
Summary of Previous Journal Entries
Showing previous 10 journal entries:
| Title | Date | #Pic | #Cmt | Excerpt |
|---|---|---|---|---|
| Productive Weekend | 2008-04-14 | Saturday I clamped the inner fender to the rear fender and clamped the assembly to the car. After adjusting the position of the inner fender a few times I was able to get it to fi... | ||
| Spitfire Is Edging Towards Body Panel Completion | 2008-04-10 | Over the weekend I got my door fit straightened out but now I have another problem. When I offer up the sill, its too short, weird. So yesterday I took a chance and... | ||
| Cutting Is Coming To An End | 2008-03-31 | Saturday was a great day to be out in the garage, the sun was out and it was nice and warm. The three pieces of the sill are all gone from the body and the rear fender is gone asi... | ||
| Spitfire Body Restoration | 2008-03-25 | 3 | The Spitfire's body was pretty crsuty it turns out. Here's a summary of my restoration work since I started at Christmas, 2007: Christmas 2007 Started... | |
| Engine Rebuild A Success | 2006-11-16 | 2 | The following is the machine work they performed: clean, magaflux, and resurface the head; install and 3-angle grind 8 hardened valve seats (intake and exhaust seat were all found ... | |
| Std Pistons, 0.020" Rings?! | 2006-05-26 | Finally an update. After having my engine at one shop for five months waiting for them to do the engine machineing I took it to another shop Monday, who promissed it... | ||
| Parts Keep Coming Off | 2006-01-11 | It started out as an engine rebuild. I then figured I might as well paint the engine compartment while the engine was out. About a week ago the grill came out becau... | ||
| Engine At Machine Shop - Finally | 2005-12-20 | Yesterday I finally got around to dropping of the block, head and crank shaft to my machinist and today I dropped off the valves, pistons and rods. He's going to ins... | ||
| Strip Down Completed | 2005-11-12 | I just finished stripping down the engine. I only found copper showing on two bearings. If I'm luck on the main journals will need to be ground down. I also found the cylinder wall... | ||
| Engine Numbers | 2005-11-07 | The B-series engine in my car isn't from a B; I believe it is actually out of a Marina. The engine number is 18V658M-L17025. Also, the "clock", or engine block casting date, locate... |
The contents of this journal entry (including entry images) are released
under the terms of the Creative Commons License unless otherwise noted.
under the terms of the Creative Commons License unless otherwise noted.
This page last modified December 01 2007 20:50:32 pm
Add a comment to this journal entry:
Please sign in if you already have an account or register now to enable this feature.