Journal: Mark's Mgbgt Adventure
 |
Visit Mark Jones's Profile for more information on this member. Subscribe to this Journal: 
What is RSS?
There are 21 entries in this Journal. Status: Member Location:  Sarnia, ON, Canada |
|
Pieces Finally Going Back On
Created on 2008-06-02 09:57:12
This was a good weekend. The car is painted and I got a couple coats on the doors and under half if the bonnet. Tonight I home to get a couple more coats on, the bonnet is really hard to do, trying to get good coverage everywhere. Its certainly not a professional paint job but Judy is very happy with it, and that is what really matters.
The real good news is that I actually started putting pieces back on the car on Sunday: tail lights and the abs transmission tunnel are back on. Also, the new rims are looking very nice. There is a lot of hard work on Judy's parts to get to this point.
The real good news is that I actually started putting pieces back on the car on Sunday: tail lights and the abs transmission tunnel are back on. Also, the new rims are looking very nice. There is a lot of hard work on Judy's parts to get to this point.
Click the thumbnail to view image:
PICT0931
PICT0941
PICT0909
PICT0931
PICT0941
PICT0909
Sponsored Links. Did you know you can turn advertising off and support this site by upgrading to a Gold Membership?
Summary of Previous Journal Entries
Showing previous 10 journal entries:
| Title | Date | #Pic | #Cmt | Excerpt |
|---|---|---|---|---|
| Busy Weekend | 2008-05-26 | Well, it was a busy weekend. I took Friday off to start painting the Spitfire. I was out taping the car by 7:30 am; wipe down and had primer on by 11, sanding by 2, seam sealer b... | ||
| Still Sanding | 2008-05-22 | Still been busy sanding down to the original paint/primer layer, applying filler, and final sanding with 320 grit paper. I will be ready to paint once I have the garage swept and ... | ||
| Sanding | 2008-05-21 | The sanding has begun. I quickly learned that my compressor is too small for my DA sander; it's rated for an average 4 cfm @ 60 psi, but the constant cfm must be much higher; the ... | ||
| Welding Complete! | 2008-04-21 | The weekend saw the A-post closing pieces, sill end cap and a front corner of the driver side floor pan welded in. That brings the welding to an end. I also dug out the grinder a... | ||
| Productive Weekend | 2008-04-14 | Saturday I clamped the inner fender to the rear fender and clamped the assembly to the car. After adjusting the position of the inner fender a few times I was able to get it to fi... | ||
| Spitfire Is Edging Towards Body Panel Completion | 2008-04-10 | Over the weekend I got my door fit straightened out but now I have another problem. When I offer up the sill, its too short, weird. So yesterday I took a chance and... | ||
| Cutting Is Coming To An End | 2008-03-31 | Saturday was a great day to be out in the garage, the sun was out and it was nice and warm. The three pieces of the sill are all gone from the body and the rear fender is gone asi... | ||
| Spitfire Body Restoration | 2008-03-25 | 3 | The Spitfire's body was pretty crsuty it turns out. Here's a summary of my restoration work since I started at Christmas, 2007: Christmas 2007 Started... | |
| Engine Rebuild A Success | 2006-11-16 | 2 | The following is the machine work they performed: clean, magaflux, and resurface the head; install and 3-angle grind 8 hardened valve seats (intake and exhaust seat were all found ... | |
| Std Pistons, 0.020" Rings?! | 2006-05-26 | Finally an update. After having my engine at one shop for five months waiting for them to do the engine machineing I took it to another shop Monday, who promissed it... |
The contents of this journal entry (including entry images) are released
under the terms of the Creative Commons License unless otherwise noted.
under the terms of the Creative Commons License unless otherwise noted.
This page last modified December 01 2007 20:50:32 pm
Add a comment to this journal entry:
Please sign in if you already have an account or register now to enable this feature.